| Hasco
Component's electromechanical relays range from less than
an amp to 80 amps. Hasco's relays are UL and CSA with some
TUV ratings. All relays have DC coils and many have an
AC coil. They come sealed for wave soldering and washing
thereby allowing the relays to be put on any assemble line.
There are surface mount low current relays available as
well.
CAR & CART 80 AMP AUTOMOTIVE RELAY
| FEATURES |
 |
High contact rating (80A) |
|
1 Form A and 1 Form C arrangements |
|
Quick connect and P.C. Board terminals |
|
Mounting Tab optional |
|
 |
| COIL RATING |
|
Rate
Voltage
(VDC)
|
Coil
Resistance
Ohms±10%
|
Max Coil
Voltage
|
Rated
Current
(mA)
|
Must
Operate
Voltage
|
Must
Dropout
Voltage
|
Power
Consumption
(W)
|
|
6
|
20
|
7.8
|
300
|
4.2
|
0.6
|
1.8W
|
|
12
|
80
|
15.6
|
150
|
8.4
|
1.2
|
|
24
|
320
|
31.2
|
75
|
16.8
|
2.4
|
| |
| CAUTION: |
1. The use of any coil voltage less than
the rated coil voltage will compromise the operation of
the relay. |
| |
2. Pickup and release voltages are for test
purposes only and are not to be used for design criteria. |
| CHARACTERISTICS |
| Contact Arrangement |
SPST (1 Form A), SPST (1 Form B),
SPDT (1 Form C) |
 |
| Contact Material |
AgSnO2, AgNi |
|
| Contact Resistance |
30 mOhms |
|
| Contact Rating (resistive
load) |
50A, 80A 14 VDC (1 Form A); 40A, 60A/ 14 VDC (1 Form
B); |
| NO: 50A, 80A 14VDC; NC: 40A, 60A/14VDC (1 Form C) |
|
| Max Switching Voltage |
75VDC |
|
| Max Switching Power |
980W |
|
| Max Switching Current |
80A |
|
| Operate Time |
7mS Max |
|
| Release Time |
5 mS Max |
|
| Operation Life |
Mechanical |
1,000,000 |
| Electrical |
100,000 1 Form A@ 80Amp;
15,000 1 Form B & 1 Form C @ 80 Amps, |
|
| Insulation Resistance |
100MOhms min. (500V DC) |
|
| Dielectric Strength |
500V/ms between coil and contact |
|
| Shock Resistance |
20g Approx. 20g |
|
| Vibration Resistance |
10-40Hz, Amplitude 1.27mm, 10-40Hz 1.27mm |
|
| Ambient Temperature |
-40°C to +85°C |
|
| Relative Humidity |
85% R.H. (at 40°C) |
|
| Weight |
46g (CAR); 48g (CART) |
| ORDERING INFORMATION |
|
CAR
|
T
|
1C
|
P
|
80
|
DC12
|
-S
|
|
Series
|
T = Mounting Tab
|
1A: 1 Form A
|
Nil: Quick Connect
|
1 Form A 80 Amp
|
6: 6VDC
|
S: Sealed
|
|
|
Nil: No Mounting Tab
|
1C: 1 Form C
|
P: PC Pin
|
1 Form C 60 Amp NC
|
12: 12VDC
|
NIL: Not
sealed
|
| |
1B: 1 Form B
|
80 Amp NO
|
24: 24VDC
|
| |
|
1 Form A 60 Amp
|
|
DIMENSIONS:
| Dust Cover |
Shrouded Cover |
|
|
|
| P.C. Board Terminals |
Terminal Arrangement |
|
|
|
PART
NUMBERS
| CAR1A80DC6 |
CAR1B80DC6 |
CAR1C80DC6 |
| CAR1A80DC12 |
CAR1B80DC12 |
CAR1C80DC12 |
| CAR1A80DC24 |
CAR1B80DC24 |
CAR1C80DC24 |
| CART1A80DC6 |
CART1B80DC6 |
CART1C80DC6 |
| CART1A80DC12 |
CART1B80DC12 |
CART1C80DC12 |
| CART1A80DC24 |
CART1B80DC24 |
CART1C80DC24 |
| CAR1AP80DC6 |
CAR1BP80DC6 |
CAR1CP80DC6 |
| CAR1AP80DC12 |
CAR1BP80DC12 |
CAR1CP80DC12 |
| CAR1AP80DC24 |
CAR1BP80DC24 |
CAR1CP80DC24 |
|
