Hasco Components International Corp.: A complete source for Reed Swiches, Electromechanical Relays and Magnets since 1976.
 
 
Home
About Hasco
Our Factory
Reed Relays
Electromechanical Relays
Reed Switches/Magnets
Proximity Reed Switches
Catalog (PDF Download)
Relay Design
Request Quote
Links
Hasco Reps
Hasco Reps
Site Map
info@hascorelays.com
 

Electromechanical Relays

Hasco Component's electromechanical relays range from less than an amp to 80 amps. Hasco's relays are UL and CSA with some TUV ratings. All relays have DC coils and many have an AC coil. They come sealed for wave soldering and washing thereby allowing the relays to be put on any assemble line. There are surface mount low current relays available as well.

KSD205
DPDT 6 AMP
FEATURES
Miniature Two Pole Relay
High Reliability
6 Amp Switching
Fully Sealed
Low Cost

File E75887
DPDT Miniature 6 Amp - KSD Series

COIL RATINGS
Type
Rated
Voltage
Coil
resistance
(Ohms)
Must
operate
Voltage
Must
dropout
Voltage
Maximum
Voltage
Power
consumption
(mW)
% of rated voltage
KSD
3VDC
167
15
Max
10 min.
Approx. 510
5VDC
102
60
70 at 20°C
150 at 20°C
6VDC
85.7
70
73 at 30°C
142 at 30°C
9VDC
56.3
135
76 at 40°C
133 at 40°C
12VDC
42.9
240
79 at 50°C
123 at 50°C
24VDC
21.2
960
82 at 60°C
113 at 60°C
48VDC
3840
   
Note: The rated current and coil resistance are measured at a coil temperature at 20°C, coil resistance ± 10% @ 20C.

CONTACT RATINGS
Item Load Type
Resistive load
(p.f. = 1)
Inductive Load
(p.f. = 0.4,
L/R = 7msec)
Material
Ag CdO, Two Type: 5A
Rated load
120VAC 6A
30VDC 6A
120VAC 3.0A
30VDC 3.0A
Carry current
6A
Max. operating voltage
250VAC, 125VDC
Max. operating current
6A
3.0A
Max. switching capacity
600A, 120W
300VA, 60W
Minimum permissible load (reference value)
5VDC, 100mA

CHARACTERISTICS
Contact resistance 50m Ohms max.
Operate time 10 msec. max.
Release time 5 msec. max.
Operating Frequency Mechanically: 18,000 operations/hour
  Electrically: 1,800 operations/hour (under rated load)
Insulation resistance 100M Ohms min. (at 500VDC)
Dielectric strength 1,500 VAC, 50/60 Hz for 1 minute between coil and contact,
dissimilar pole 750 VAC, 50/60 Hz for 1 minute between
non-continuous contacts of same pole
Vibration 1.5mm double amplitude, 10 to 55 Hz
Shock 100 m/sec2 (approx 10 G’s)
Ambient temperature Operating: –25 to +60°C
Humidity 45-85% RH
Service life Mechanically: 10,000,000 operations min.
Weight Approx. 10g.

ORDERING INFORMATION
KSD205
DC xx
3 to 24 VDC

DIMENSIONS: mm (inches)
Dimensions
Terminal Arrangement (Bottom View) & Mounting Holes (Pin View)

PART NUMBERS
KSD205DC3    
KSD205DC5    
KSD205DC6    
KSD205DC9    
KSD205DC12    
KSD205DC24    

E-mail This Page
  Print Preview

 
Hasco Components International Corp.: A complete source for Reed Swiches, Electromechanical Relays and Magnets since 1976 - 906 Jericho Turnpike - New Hyde Park, NY  11040 - Phone: 516-328-9292 - Fax: 516-326-9125
Electromechanical Relays - DPDT Relay 6 Amps
© 2010 Hasco Relays and Electronics International Corp.