Hasco
American owned and
operated since 1976

Navigation


Electromechanical Relays Latching Relays Reed Relays

HBS Series

HBS SeriesSPDT 1 Amp

Features

  • Small size
  • Fully sealed
File No.:E75887 RoHS Compliant 

Contact Ratings

Contact Arrangement 1C
Contact Resistance 100mΩ (0.1A 6VDC)
Contact Material Silver Alloy(Gold Flash)
Contact Rating(Resistive) 0.5A/125VAC 30VDC
Max. Switching Voltage 125VAC/60VDC
Max. Switching Current 1A
Max. Switching Power 62.5VA/30W
Mechanical Life 1×107 operations
Electrical Life 1×105 operations

Ordering Information

Characteristics

Insulation Resistance 1000MΩ (at 500VDC)

Dielectric
Strength

Between coil & contacts 1000VAC 1min
Between open contacts 400VAC 1min
Operate time (at nomi. volt.) ≤5ms
Release time (at nomi. volt.) ≤5ms
Humidity 35% ~ 85% RH
Ambient temperature -30°C ~ +70°C
Shock Resistance 98m/s2
Vibration resistance 10Hz ~ 55Hz 3.3mm
Unit weight Approx. 2.2g
Construction Sealed Type

Notes:
1) The data shown above are initial values.
2) Please find coil temperature curve in the characteristic curved below.

Coil Data at 20°C

Standard Type

Nominal
Voltage
VDC

Pick-up
Voltage
(Max.)
VDC

Drop-out
Voltage
(Min.)
VDC

Max.
Allowable
Voltage
VDC

Coil
Resistance
Ω±10%

1.5 1.20 0.15 1.95 11.3
3 2.40 0.30 3.9 45
5 4.00 0.50 6.5 125
6 4.80 0.60 7.8 180
9 7.20 0.90 11.7 405
12 9.60 1.20 15.6 720
24 19.20 2.40 31.2 2880
Sensitive Type

Nominal
Voltage
VDC

Pick-up
Voltage
(Max.)
VDC

Drop-out
Voltage
(Min.)
VDC

Max.
Allowable
Voltage
VDC

Coil
Resistance
Ω±10%

1.5 1.20 0.15 1.95 15
3 2.40 0.30 3.9 60
5 4.00 0.50 6.5 167
6 4.80 0.60 7.8 240
9 7.20 0.90 11.7 540
12 9.60 1.20 15.6 960
24 19.20 2.40 31.2 3840


Coil

Coil Power Standard Type:200mW
Sensitive Type:150mW

Safety Approval Ratings

UL/CUL

0.1A/30VDC
0.3A/60VDC
0.5A/125VAC

Outline Dimensions, Wiring Diagram And PC Board Layout Unit: inch(mm)

Outline Dimensions
Wiring Diagram
(Bottom view)
PCB Layout
(Bottom view)

Remark:
1) In case of no tolerance shown in outline dimension: outline dimension ≤1mm,tolerance should be ±0.2mm; outline dimension >1mm and ≤5mm,tolerance should be ±0.3mm;outline dimension >5mm, tolerance should be ±0.4mm.
2) The tolerance without indicating for PCB layout is always ±0.1mm.

Characteristic Curves

Notice:
(1) To avoid using relay under strong magnetic field which will change the parameters of relays such as pick-up voltage and drop-out voltage.
(2) The relay may be damaged because of falling or when shocking conditions exceed the requirement.
(3) Regarding the plastic sealed relay, we should leave it cooling naturally untill below 40°C after welding, then clean it and deal with coating, remarkably the temperature of solvents should also be controlled below 40°C. Please avoid cleaning the relay by ultrasonic, avoid using the solvents like gasoline, Freon, and so on, which would affect the configuration of relay or influence the environment.
(4) About preferable condition of operation, storage and transportation, please refer to “Relays Terminology”.

PDF Document

Share | |
Stay Connected
906 Jericho Turnpike
New Hyde Park, NY 11040
P: 516-328-9292
F: 516-326-9125
info@hascorelays.com
Hasco Relays and Electronics International Corp. is an American owned and American managed company.

Factory:
Hasco (Suzhou) Electr. Co. LTD

Bldg No.13, EDI Proc. District
#888, Pangjin Rd, Wujiang Zone
Jiangsu, P.R.C.  215200
China
info@hascorelays.com