HPR Series

HPR Series
HPR Series

Features

  • 10A switching capability
  • 1 Form A and 1 Form C configurations
  • Subminiature, standard PCB layout
  • Sealed Type, Dust Cover Type and Flux Tight Type is available.
Recognized Component Mark

File No.:E75887

TÜV Product Certification

File No.:R 50325379

RoHS Compliant

Contact Ratings

Contact Arrangement1A1C
Contact Resistance≤100mΩ (1A 24VDC)
Contact MaterialAgSnO
Contact Rating (Resistive)1A1C
N.O.N.C.
5A/250VAC
5A/30VDC
10A/125VAC		5A/250VAC
5A/30VDC
10A/125VAC		5A/250VAC
5A/30VDC
Max. Switching Voltage250VAC/150VDC
Max. Switching Current10A5A
Max. Switching Power1250VA/150W
Mechanical Life45×104 OPS
Electrical Life1A type:1×105OPS (5A 250VAC, Resistive load,
Room temp., 1s on 1s off)
1C type:5×104OPS (N.O./N.C.:5A 250VAC,
Resistive load, Room temp., 1.5s on 1.5s off)

Characteristics

Insulation Resistance1000MΩ (500VDC)
Dielectric
Strength		Between coil & contacts4000VAC 1min
Between open contacts750VAC 1min
Operate time (at nomi. volt.)≤20ms
Release time (at nomi. volt.)≤10ms
Humidity85%
Operation temperature-40°C~+85°C
UL Class FInsulation System Class F
Shock
Resistance		Functional98m/s2
Destructive980m/s2
Vibration resistance10Hz ~ 55Hz 1.5mm DA
Unit weightApprox. 7g
ConstructionSealed Type, Dust Cover Type, Flux Tight Type

Notes:
1) The data shown above are initial values.
2) Please find coil temperature curve in the characteristic curves.

Ordering Information

HPRF1A12 –1S –XXXX
ModelF:Class F1A:1 Form A 1C:1 Form CCoil Voltage1:Dust Cover Type 2:Flux Tigth Type
Blank:Sealed Type		S:Sensitive type(Only for 1 Form A)
Blank:Standard type		Customer Code

Notes:
1. PC board assembled with dust cover type and flux tight type relays can not be washed and/or coated.
2. Dust cover type and flux tight type relays can not be used in the environment with dust, or H2S, SO2, NO2 or similar gaseous environment etc.

Coil Data at 25°C

Standard Type

Nominal
Voltage
VDC		Operate
Voltage
(Max.)
VDC		Release
Voltage
(Min.)
VDC		*Max.
Allowable
Voltage
VDC		Coil
Resistance
Ω±10%
53.750.256.563
64.500.307.890
96.750.4511.7202
129.000.6015.6360
2418.01.2031.21440

Sensitive Type(Only for 1 Form A)

Nominal
Voltage
VDC		Operate
Voltage
(Max.)
VDC		Release
Voltage
(Min.)
VDC		*Max.
Allowable
Voltage
VDC		Coil
Resistance
Ω±10%
53.750.257.5125
64.500.309.0180
96.750.4513.5405
129.000.6018.0720
2418.01.2036.02800

Note:”*Max Allowable Voltage”: The relay coil can endure max allowable voltage for a short period time only.

Coil

Coil PowerStandard Type: 400mW
Sensitive Type: 200mW
36

Safety Approval Ratings

UL&CULN.O.:5A 250VAC, 100°C, 5×104OPS
N.O.:5A 30VDC, 100°C, 2×104OPS
N.O.:10A 125AC, 100°C, 5×104OPS
N.O.:1/6HP 125VAC, 40°C, 5×104OPS
N.C.:5A 250VAC, 100°C, 5×104OPS
N.C.:5A 30VDC, 100°C, 2×104OPS
TüVN.O.:10A 125VAC, 2×104OPS
N.C.:5A 250VAC, 5×104OPS
N.C.:5A 30VDC, 5×104OPS
N.O./N.C.:5A 250VAC, 5×104OPS
N.O./N.C.:5A 30VDC, 5×104OPS

NOTES:
1. All values without specified temperature are at 25°C.
2. The above lists the typical loads only. Other loads may be available upon request.

OUTLINE DIMENSIONS, WIRING DIAGRAM AND PC BOARD LAYOUT. Unit: inch(mm)

Outline Dimensions

1A

1A Outline Dimensions

1C

1C Outline Dimensions

Wiring Diagram
(Bottom view)

1A

1A Wiring Diagram

1C

1C Wiring Diagram

PCB Layout
(Bottom view)

1A

1A PCB Layout

1C

1C PCB Layout

* The tolerance without indicating for PCB layout is always ±0.1mm.

Unless otherwise specified tolerances are:

≤1mm＞1mm and ≤5mm＞5mm
±0.2mm±0.3mm±0.4mm

Characteristic Curves

Timing

Timing

Coil Temperature Rise

Coil Temperature Rise

Life Curves

Life Curves

PACKAGING SPECIFICATION

BLISTER BOXINNER CARTONOUTER CARTONOUTER CARTON SIZE
100PCS600PCS2400PCSL375mm*W280mm*H400mm

APPLICATION GUIDELINES

Automatic Soldering
* Flow solder is the optimum method for soldering.
* Adjust the level of solder so that it does not overflow onto the top of the PC board.
* Unless otherwise specified, solder under the following conditions depending on the type of relay.

Preheat time
20°C-100°C		Rising slope
20°C-120°C		Decreasing slope
Peak-150°C		Welding temperature
255°C-265°C
90±5 seconds＜3°C/s＜4°C/s3~5s

Hand Soldering
* Keep the tip of the soldering iron clean.

Solder lron30W or 60W
lron Tip TemperatureApprox. 350°C 662°F
Solder TimeWithin approx. 3 seconds

* Immediate air cooling is recommended to prevent deterioration of the relay and surrounding parts due to soldering heat.
* Although the sealed type relay can be cleaned, avoid immersing the relay into cold liquid
(such as washing solvent) immediately after soldering. Doing so may deteriorate the sealing performance.

Discard the dropped product

PDF Document