RPR Series
SPDT 10 Amp
Features
- 10A switching capability
- 1 Form A and 1 Form C configurations
- Subminiature, standard PCB layout
- Sealed Type, Dust Cover Type and Flux Free Type is available
- Outline Dimensions:(18.4×10.2×15.3)mm
![]() |
![]() |
Contact Ratings
Contact Arrangement | 1A | 1C | |
Contact Resistance | 100mΩ (1A 6VDC) | ||
Contact Material | Silver Alloy | ||
Contact Rating(Resistive) | Standard type | Sensitive type | Standard type |
5A/250VAC |
3A/250VAC |
3A/250VAC |
|
Max. Switching Voltage | 250VAC/30VDC | ||
Max. Switching Current | 10A | ||
Max. Switching Power | 1250VA/150W | ||
Mechanical Life | 1×107 operations | ||
Electrical Life | 1×105 operations |
Characteristics
Insulation Resistance | 1000MΩ (at 500VDC) | |
Dielectric |
Between coil & contacts | 2500VAC 1min |
Between open contacts | 1000VAC 1min | |
Operate time (at nomi. volt.) | ≤8ms | |
Release time (at nomi. volt.) | ≤5ms | |
Humidity | 35% ~ 95% RH | |
Ambient temperature | -40°C ~ +70°C | |
Shock |
Functional | 98m/s2 |
Destructive | 980m/s2 | |
Vibration resistance | 10Hz ~ 55Hz 1.5mm DA | |
Unit weight | Approx. 6g | |
Construction | Sealed Type, Dust Cover Type, Flux Free Type |
Notes:
1) The data shown above are initial values.
2) Please find coil temperature curve in the characteristic curved below.
Coil Data at 20°C
Standard Type
Nominal |
Pick-up |
Drop-out |
Max. |
Coil |
---|---|---|---|---|
3 | 2.25 | 0.15 | 3.9 | 20 |
5 | 3.75 | 0.25 | 6.5 | 55 |
6 | 4.50 | 0.30 | 7.8 | 80 |
9 | 6.75 | 0.45 | 11.7 | 180 |
12 | 9.00 | 0.60 | 15.6 | 320 |
18 | 13.5 | 0.90 | 23.4 | 720 |
24 | 18.0 | 1.20 | 31.2 | 1280 |
Sensitive Type
Nominal |
Pick-up |
Drop-out |
Max. |
Coil |
---|---|---|---|---|
3 | 2.25 | 0.15 | 4.5 | 45 |
5 | 3.75 | 0.25 | 7.5 | 125 |
6 | 4.50 | 0.30 | 9.0 | 180 |
9 | 6.75 | 0.45 | 13.5 | 400 |
12 | 9.00 | 0.60 | 18.0 | 720 |
18 | 13.5 | 0.90 | 27.0 | 1600 |
24 | 18.0 | 1.20 | 36.0 | 2800 |
Coil
Coil Power | Standard Type: 450mW |
Sensitive Type: 200mW |
Safety Approval Ratings
UL&CUL |
5A/250VAC, 5A/30VDC, 10A/125VAC |
Outline Dimensions, Wiring Diagram And PC Board Layout Unit: inch(mm)
1A
Outline Dimensions |
---|
![]() |
Wiring Diagram (Bottom view) |
![]() |
PCB Layout (Bottom view) |
![]() |
1C
Outline Dimensions |
---|
![]() |
Wiring Diagram (Bottom view) |
![]() |
PCB Layout (Bottom view) |
![]() |
Remark:
1) In case of no tolerance shown in outline dimension: outline dimension ≤1mm,tolerance should be ±0.2mm; outline dimension >1mm and ≤5mm,tolerance should be ±0.3mm;outline dimension >5mm, tolerance should be ±0.4mm.
2) The tolerance without indicating for PCB layout is always ±0.1mm.
Characteristic Curves
![]() |
![]() |
![]() |